Marketing hotline:
  • 0755-88844305
  • Industry information

    What are the types of the inch-Flange bearing we produce?

    Responsible Editor:Hunan Minebeada Technology Co,. Ltd   Release time:2018-04-10

    Bearings with a flange on the outer ring simplify axial location. These bearings are cost effective by not requiring spot facing when housing the end face.
    According to the customer’s requirements,we could produce any sizes of the inch-Flange bearing. Some main types and sizes of the bearing with flange which we produce are as follows:

    Type Bore Diameter Outer Diameter Flange
    Outer Diameter
    Width Flange Width Load Rating Cr(N) Load Rating Cor(N) Max.Speed
    Grease Oil
    OPEN ZZ OPEN ZZ *1000rpm
    FR1-4ZZS 1.984 6.350 7.518 2.380 3.571 0.584 0.787 284 96 67 80
    FR133ZZ 2.380 4.762 5.944 1.588 2.380 0.457 0.787 144 53 80 95
    FR1-5ZZS   7.938 9.119 2.779 3.571 0.584 0.787 552 176 60 71
    FR144ZZS 3.175 6.350 7.518 2.380 2.779 0.584 0.787 284 96 67 80
    FR2-5ZZ   7.938 9.119 2.779 3.571 0.584 0.787 558 180 60 67
    FR2-6ZZS   9.525 10.719 2.779 3.571 0.584 0.787 640 227 53 63
    FR2ZZ   9.525 11.176 3.967 3.967 0.762 0.762 631 219 56 67
                           
    FR155ZZS 3.967 7.938 9.119 2.779 3.175 0.584 0.914 359 150 53 63
                           
    FR156ZZS 4.762 7.938 9.119 2.779 3.175 0.584 0.914 359 150 53 63
    FR166ZZ   9.525 10.719 3.175 3.175 0.584 0.787 709 272 50 60
    FR3ZZ   12.700 14.351 4.978 4.978 1.067 1.067 1301 488 43 53
                           
    FR168ZZS 6.350 9.525 10.719 3.175 3.175 0.584 0.914 373 172 48 56
    FR188ZZ   12.700 13.894 3.175 4.762 0.584 1.143 1082 442 40 50
    FR4ZZ   15.875 17.526 4.978 4.978 1.067 1.067 1480 621 38 45
                           
    FR1810ZZS 7.938 12.700 13.894 3.967 3.967 0.787 0.787 542 276 40 48
                           
    FR6ZZ 9.525 22.225 24.613 5.558 7.142 1.570 1.570 3332 1422 32 38

    Last article:What are the types of the Flanged bearing we produce?

    Next article:What are the types of the miniature bearing we produce?